DC Rectifier for Electroplating 2000A /15V
Specification
| SPECIFICATIONS FOR GKD15-2000CVC |
| Input AC | 380V±10% | 3phase | 50/60Hz |
| Output DC | Volt | 0~15V Adjustable |
| Current | 0~2000A Adjustable |
| Power | 30KW |
| Efficiency | >85% |
| Switching Frequency | 20KHz |
| Protection | Short circuit protection
Overheating protection
Phase lack protection
Input over/low voltage protection |
Working Condition
(Temperature) | -10℃~50℃ | Control mode | Panel control
Remote control |
| Net weight | 140kg | Working mode | Constant Voltage(CV)
Constant Current(CC) |
| Dimension(mm) | 820*820*1000mm | Cooling way | Air cooling |
detail picture:
Application
Advantages of stainless steel electropolishing:
Inside has the same color inside and outside, strong light retention, mechanical polishing can not make the notch flat.
Production has high efficiency and low cost.
(3) increase surface corrosion resistance, applicable to all stainless steel.
Requirements for electroplating and polishing of stainless steel:
The power waveform is not strict, SCR type or high frequency electroplating rectifier can be selected.
Electropolishing bath and supporting equipment (anode rod):
Rigid PVC plates are welded together. The three electrode bars on the top of the bath are in the middle of the movable anode bar, and then are connected with the anode (or positive pole), both sides are used as cathode poles, and are connected with the power cathode (negative pole).
stainless steel electropolishing process:
Stainless steel electrolytic polishing process: degreasing – washing – anti rust – washing – electrolytic polishing – washing – passivation – packaging.
Features
1. 0~10V, 4~20mA,PLC,Timer, Ampere-minute/hour counter, HMI can be provided
2. Control mode: Local control or Remote control(the length of cable is determined by customers)
3. Japan IGBT(the default choice) or Germany IGBT are adopted
4. After being phosphated, galvanized and plastic sprayed, the chassis has excellent corrosion resistence function
5. Easy to operate and repaire
1. Cabinet
a: Adopting completely digitalized machining
b: Adopting cold rolled production of iron steel sheet, after phosphorization, zinc plating, plastic spray, the rectifier gets better structural strength and anti-corrosion.
c: Reasonable structure design, isolated inverter design, rectification part is convenient to disassemble and mend because of its neat assembling.
d: Radiator gets better cooling effect because of its 1.5 times capacity.
2 Electric control system
a: The rectifier adopts full bridge phase-shifted soft switch control, ensuring the lowest power loss of IGBT. The capacity of IGBT become 3 times bigger.
b: The main transformer. It adopts amorphous core to increase transformer efficiency and cool transformer, and not only can lighten rectifier weight, but also can strengthen rectifier stability and reliability. At its elementary stage, it adopts series blocking capacitor.
c: Magnetic deviation automatic correction circuit is adopted and the total power of magnetic core gets enlarged 1.5 times.
3 Schottky Barrier Diode
a: It has been expanded 4 times.
4 All the controlling boards get antiseptic treatment with imported lacquer.
How to install rectifier
This is installation way for remote control rectifier. Not only this way.
1. To connect copper bar with bath/tank
2. To ensure power supply/rectifier is grounded
3. To ensure there is enough water for water cooling type power supply/rectifier
4. We advice that all rectifiers should be isolated to increase of its life.
Product Tags:
|
|
IGBT Remote Control 2000a 15v Dc Rectifier For Electroplating Images
|
